From the environment protection Agency US, Here are some beneficial information for cleaning your spa pedicure chair’s foot part. It can be used for both clients and users.
Step by step instructions for disinfecting Spa Pedicure Chairs:
During working time – After customer was out the pedicure chair footbath, while feet are massaged, toes are painted or other opportunities
Drain the water from the foot spa basin or bowl and remove any visible debris.
Clean the surfaces of the foot spa with soap or detergent, rinse with clean water, and drain.
After cleaning, disinfect* the surfaces with an EPA-registered hospital disinfectant according to the manufacturer’s directions on the label. Surfaces must remain wet with the disinfectant for 10 minutes or the time stated on the label, which may be shorter. – For whirlpool foot spas, air-jet basins, “pipe-less” foot spas, and other circulating spas: It is best to disinfect by filling the basin with clean water, adding the appropriate amount of liquid disinfectant, and turning the unit on to circulate the disinfectant for the entire contact time. After disinfection, drain and rinse with clean water. Some pedicure chairs areasy to clean than others. We recommend this cost efficient spa pedicure chair: called the lenox portable-pedicure.
For whirlpool foot in Pedicure chair, air-jet basins, “pipe-less” foot spas, and other circulating spas:
Remove the filter screen, inlet jets, and all other removable parts from the basin and clean out any debris trapped behind or in them.
Using a brush, scrub these parts with soap or disinfectant (following cleaning directions).
Rinse the removed parts with clean water and place them back into the basin apparatus.
Fill the basin with clean water and add an EPA-registered hospital disinfectant, following label directions. Turn the unit on and circulate the system with the liquid for 10 minutes, or the label-indicated time if different. The whirlpool mechanism of the tub must be operating for the entire disinfection period so the piping and internal components that contain hidden bacteria are disinfected.
After disinfection, drain, rinse, and air dry.
For simple basins (no circulation):
Drain the basin and remove any visible debris.
Scrub the bowl with a clean brush and soap or disinfectant (following cleaning directions). Rinse and drain.
Disinfect basin surfaces with and EPA-registered hospital disinfectant, following manufacturer’s instructions. Surfaces must remain wet with the disinfectant for 10 minutes or the contact time stated on the label. If you are looking to purchase an affordable pedicure chairs for your salon, these tips can be very helpful.
Drain the basin, rinse with clean water, and let air-dry.
In brief, as a salon Owner/spa Onwer.Following these simple steps can be very helpful in preventing infections for your clients and most importantly keeping the foot part of the pedicure chairs clean at all time.